- This topic has 7 replies, 4 voices, and was last updated 14 years, 10 months ago by
.
-
Topic
-
-
Replies
-
Kenwood TS-930S, Henry 3K-3 Amp, MFJ-986 tuner, SignaLink USB and Bencher Paddles.Kenwood TS-820S, Dentron MLA-2500B Amp, MT-3000A tuner and J-38 key.Icom 706M2G, LDG tuner, PK-232MBX TNC.160 meter DiPole fed with 450 ohm ladder line, 6BTV vertical, dual band ringo, and Halo's on 10, 6, 2 and 70cm.WOW! I don't really have a shack. Just a couple radios I try to hide from the wife and kids!LOL!
Hi Jason, Radio has beed a big part of my life since I was a kid. My Wife is also a Ham. We are mostly into DXing and Contesting. We are also active with local ARES and I am active with AF MARS. Our shack is just a desk in the corner of the garage. Most of our equipment is 20 plus years old. So no mater what equipment you have, wherever you operate from is your shack.Tell us what you are running. What radios, modes etc. BTW I like your QSL card on QRZ. We need to work each other so I can get one. 73, SeanKD7MSC
Currently I have a kenwood THF6A triband HT, a Yaesue 1802M as my mobile rig, and FT817 with LDG Z100 auto tuner for my HF work. A very basic shack but it works for the emcom stuff I am most concerned with. I have small kids still so not a lot of time to play around with it. I mostly just listen and rarely make contacts. Sometimes I will answer in a contest or something. I would like to eventually get the 857 or 897 down the road to have more power. My furthest QSL from my QTH in California was a guy in Heston Kansas. On five watts I was pretty happy. If you want one of my home made QSL cards maybe we can try to make contact some time. Your hearing me though would probably be very dependent on how good your antenna system is. 😉 I don't have any pictures as my “shack” is pretty much spread out in places where the little ones can't get to it.
My shack consists of: Kenwood TS-430S. PS-50 and AT-230 for HF. Yaesu FT-1500M for 2 metres and Icom T2H HT. Dirland 22amp power supply, PSK31 homebrew interface, AOR scanner. My IRLP link uses a Alinco DR-135T 2 metre transceiver. In my vehicles I have Kenwoods TM-D710A and TM-732A.Marty - VK4DOG
Hamshack of K1NWB…Kenwood TS-830S, SP-230, VFO-230, AT-230, SM-220, Yaesu FL-7000; Kenwood TS-120, AT-120, spkr; TenTec Omni-A; Yaesu FT-920, spkr and mic…, (note: this pic reflects my TS-520)
- You must be logged in to reply to this topic.